Heatsink shine na'urar da ake buƙata don sanyaya na'urar semiconductor kamar nau'in diski da nau'in nau'in nau'in thyristor da diode ta iska ko ruwa.Don kula da aikin al'ada da abin dogara, ya zama dole don zaɓar heatsink mai dacewa kuma a haɗa shi da kyau.Babban hanyoyin da taka tsantsan na tara heatsinks sune masu zuwa:
1. Tabbatar cewa polarity na taro daidai ne (duba hotunan shigarwa na heatsink daban-daban), kayan haɗi sun cika, kuma matsa lamba ya hadu da ka'idoji (duba teburin da ke ƙasa), idan akwai fan, jagorancin fan. kamata yayi daidai.
| Girman Na'urar (yankin lamba) mm | Saita matsa lamba na ruwa (MPa) | Torque (Nm) | Girman Na'urar (yankin lamba) mm | Saita matsa lamba na ruwa (MPa) | Torque (Nm) |
| Φ25.4 | 3.4 × (1 ± 10%) | 10± 1 | Φ55 | 14.4×(1±10%) | 60± 2 |
| Φ29.72/30 | 5.5× (1 ± 10%) | 18± 1 | Φ60 | 14.9 × (1 ± 10%) | 65± 2 |
| Φ35 | 7.5× (1 ± 10%) | 22±1 | Φ63.5 | 15.4×(1±10%) | 70± 2 |
| Φ38.1/40 | 8.5× (1 ± 10%) | 25±1 | Φ70 | 16.2× (1 ± 10%) | 75±2 |
| Φ45 | 12.3 × (1 ± 10%) | 35± 1 | Φ76 | 19.2×(1±10%) | 90± 2 |
| Φ48 | 13 × (1 ± 10%) | 40± 2 | Φ89 | 24.2× (1 ± 10%) | 100± 2 |
| Φ50.8 | 13.7× (1 ± 10%) | 50± 2 |
|
|
2. Tsawon kullun yana da matsakaici, kuma bayan an yi amfani da matsa lamba, ƙuƙwalwar ta fito da hakora 2-3 daga goro ya dace.
3. Sassan insulation ba su da kyau ba tare da fasa ko lalacewa ba.
4. Nisa tsakanin sandunan tagulla an bi ka'idodi (duba teburin da ke ƙasa), kuma nisa mai dacewa tsakanin fins na jerin SF heatsink mai sanyaya iska shine 14-18mm.
4.1 Nisa tsakanin sandunan jan karfe na jerin SF
| Samfura | Nisa Tsakanin Bars na Copper (mm) |
| SF12 | 21-26 |
| SF13 | 21-26 |
| SF14 | 44-49 |
| SF15 | 49-54 |
| SF16 | 65-70 |
| SF17 | 72-77 |
4.2 Nisa tsakanin sandunan jan karfe na jerin SS
| Samfura | Nisa Tsakanin Bars na Copper (mm) |
| SS11 | 64±3 |
| SS12 | 64±3 |
| SS13 | 64±3 |
| SS14 | 74±3 |
| SS15 | 80± 3 |
| SS16 | 90± 3 |
5. Dominheatsink mai sanyaya iska, Na sama da na ƙananan heatsink ya kamata a daidaita su daidai kuma a tsaye.Don heatsink mai sanyaya ruwa, sandunan tagulla na sama da na ƙasa yakamata a daidaita su daidai da farantin hawa.
6. Jiangsu Yangjie Runau Semiconductor zai gudanar da dukan dubawa na kowane aka gyara da taro ga al'ada zazzabi jure irin ƙarfin lantarki da VGT / IGT sigogi kafin bayarwa.
Hanyoyin da aka ambata a sama da kuma taka tsantsan sune yanayin al'ada don haɗawa da sanyi mai sanyi da ruwa mai sanyi.Idan kowane buƙatu na musamman daga abokin ciniki, da fatan za a tuntuɓe mu jin kyauta.A lokaci guda, don tabbatar da ingantaccen aiki na aikace-aikacen, musamman don buƙatunhigh iko thyristorkumahigh ikon diode, da fatan za a tuntuɓi tare da sojojin tallace-tallace na Jiangsu Yangjie Runau Semiconductor Co, don ba da shawara na musamman da ingantaccen na'urar inganci.
Lokacin aikawa: Afrilu-28-2023